Keysight Technologies E36200 Series Service Manual

Keysight Technologies E36200 Series Service Manual Manual pdf 4 page image

4 Keysight E36200 Series Service GuideSafety ConsiderationsRead the information below before using this instrument.The following general safety precautions must be observed during all phases ofoperation, service, and repair of this instrument. Failure to comply with theseprecautions or with specific warnings elsewhere in this manual violates safetystandards for design, manufacture, and intended use of the instrument. KeysightTechnologies assumes no liability for the customer’s failure to comply with theserequirements.WARNING – BEFORE APPLYING POWERVerify that the correct fuse is installed. See “Fuse Information” in theE36200 Series User’s Guide for additional details. Ensure the mainssupply voltage fluctuation do not exceed ±10% of the nominal supplyvoltage.– GROUND THE INSTRUMENTThis product is a Safety Class I instrument (provided with a protectiveearth terminal). To minimize shock hazard, the instrument chassis andcabinet must be connected to an electrical ground. The instrument mustbe connected to the AC power supply mains through a three-conductorpower cable, with the third wire firmly connected to an electrical ground(safety ground) at the power outlet. Any interruption of the protective(grounding) conductor or disconnection of the protective earth terminalwill cause a potential shock hazard that could result in personal injury. Ifthe instrument is to be energized via an external autotransformer forvoltage reduction, be certain that the autotransformer common terminalis connected to the neutral (earthed pole) of the AC power lines (supplymains).– DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE OR WETENVIRONMENTSDo not operate the device around flammable gases or fumes, vapor, orwet environments.