Keysight Technologies E36200 Series Service Manual

Keysight Technologies E36200 Series Service Manual Manual pdf 88 page image

2 Verification and Adjustments88 Keysight E36200 Series Service GuideSave the calibration dataTo save calibration data, go to the CAL Save menu to save the calibration data orenable the Auto Save feature. With Auto Save, the calibration data will be savedwhen you exit the calibration menu.After completing the Voltage, Current, and Low Range Current calibrations, savethe calibration data before exiting the calibration state, or simply exit thecalibration state if Auto Save is turned On.– To save the CAL data: CAL:SAVE– To enable the CAL Auto Save: CAL:ASAVE ON– To exit the CAL State: CAL:STAT 1

5 Enter the measured value, and press Next. CAL:CURR , (@)6 Read DONE or FAIL on the display. (wait 30 seconds)SYST:ERR?7 Press Cal Save. CAL:SAVEStep Front panel SCPI