Keysight Technologies E5092A Installation Manual

Keysight Technologies E5092A Installation Manual Manual pdf 11 page image

11Keysight E5092A Configurable Multiport Test SetInstallation Guide2 InstallationThis chapter describes the setup of E5092A.Incoming inspectionWhen you receive the product, follow the below steps to perform the incominginspection.Step 1. Check that the packing box or shock-absorbing material used to package theE5092A has not been damaged.Step 2. Check the packaged items supplied with the configurable multiport test setfor any damage or defects.Step 3. By referring to the box contents list that is separately appended, check thatall packaged items supplied with the configurable multiport test set havebeen provided as per the specified options.Step 4. After checking, if one of the following applies, contact your nearest KeysightTechnologies sales and service office.1. If the packing box or shock-absorbing material is damaged or theshock-absorbing material has traces where extreme force has been applied.2. A packaged item supplied with the configurable multiport test set hasmechanical damage or defects.When unpacking the configurable multiport test set, if the external face ofthe device (such as, the cover, front/rear panel, power switch, and portconnectors) appear to be damaged during transport, do not turn on thepower. Otherwise, you may get an electrical shock.If the packing box or shock-absorbing material has been damaged, leavethe packing box or shock-absorbing material as is until other inspectionsitems are checked as follows.