Keysight Technologies M8197A User Manual

Contents

Keysight Technologies M8197A User Manual Manual pdf 31 page image

System Configuration 3Keysight M8197A User’s Guide 313.1.1 Up to 4 M8195A AWG Channels in an M9502A 2-Slot ChassisTo configure a synchronous system with up to 4 AWG-channels including highresolution triggering and dynamic sequence control, use one 2-slot AXIe chassisM9502A, one M8197A synchronization module, and one M8195A 4-channel ArbitraryWaveform Generator module.• The M8197A synchronization module must be inserted in slot 1,• The M8195A AWG module must be inserted in slot 2.3.1.2 Up to 16 M8195A AWG Channels in an M9505A 5-Slot ChassisTo configure a synchronous system with up to 16 AWG-channels including highresolution triggering and dynamic sequence control, use one 5-slot AXIe chassisM9505A, one M8197A synchronization module, and up to four M8195A 4-channelArbitrary Waveform Generator modules. The M8197A synchronization module must always be inserted in the lowestslot number of the synchronous system. The M8197A and M8195A modules of the synchronous system must beinserted in ascending slot numbers without leaving a slot empty. In case a M9536A system controller module is used, the controller modulemust be inserted in slot 1.Multiple (maximum two) synchronous systems can be built in one 5-slot chassis.3.1.3 Up to 16 M8195A AWG Channels in an M9514A 14-Slot ChassisTo configure a synchronous system with up to 16 AWG-channels including highresolution triggering and dynamic sequence control, use one 14-slot AXIe chassisM9514A, one M8197A synchronization module, and up to four M8195A 4-channelArbitrary Waveform Generator modules. The M8197A synchronization module must always be inserted in the lowestslot number of the synchronous system. The M8197A and M8195A modules of the synchronous system must beinserted in ascending slot numbers without leaving a slot empty. A synchronous system must be either completely inserted left (slot 1s ..6) orright (slots 8 …14) from the AXIe System Module (ASM). In case a M9536A system controller module is used, the controller modulemust be inserted in slot 1.Multiple (maximum five) synchronous systems can be built in a 14-slot chassis.