5 Remote Programming80 Keysight M8197A User’s Guide5.7.10 :ARM [:SEQuence][:STARt][:LAYer]:TRIGger:OPERation[?]ASYNchronous|SYNChronousCommand :ARM[:SEQ][:STAR][:LAY]:TRIG:OPER[?]Long :ARM[:SEQuence][:STARt][:LAYer]:TRIGger:OPERation[?]Parameters ASYNchronous|SYNChronousParameter Suffix NoneDescription Set or query the M8197A’s trigger operation mode.Example Command:ARM:TRIG:OPER SYNCQuery:ARM:TRIG:OPER?5.7.11 :ARM[:SEQuence][:STARt][:LAYer]:EVENt:LEVel[?] |MINimum|MAXimumCommand :ARM[:SEQ][:STAR][:LAY]:EVEN:LEV[?]Long :ARM[:SEQuence][:STARt][:LAYer]:EVENt:LEVel[?]Parameters |MINimum|MAXimumParameter Suffix Volt (V) or millivolt (mV)Description Set or query the threshold level of the M8197A event input. – Threshold level voltage.Example Command:ARM:EVEN:LEV 3e-9Query:ARM:EVEN:LEV?5.7.12 :ARM[:SEQuence][:STARt][:LAYer]:EVENt:SLOPe[?] POSitive|NEGative|EITHerCommand :ARM[:SEQ][:STAR][:LAY]:EVEN:SLOP[?]Long :ARM[:SEQuence][:STARt][:LAYer]:EVENt:SLOPe[?]Parameters POSitive|NEGative|EITHerParameter Suffix NoneDescription Set or query the event input slope. POSitive – rising edge NEGative – falling edge EITHer – bothExample Command:ARM:EVEN:SLOP POSQuery:ARM:EVEN:SLOP?
