Keysight Technologies M9260A Startup Manual

Keysight Technologies M9260A Startup Manual Manual pdf 24 page image

1 Inspection, Installation, and Verification24 Keysight M9260A Startup GuideStep 3: Install the Controller and SoftwareSystem requirementsThe following table lists the minimum system requirements for Keysight IOLibraries Suite and controllers. In general, any x86 or x64 (except Itanium)architecture should work but there may be a significant decrease in performance ifthe processor speed is below the minimum requirements.Table 1-1 System requirementsOperating system Windows® 7 SP1 (32 or 64-bit) or higherProcessor speed – 1.5 GHz (x86 and x64) or higher– Itanium 64 is not supportedAvailable memory 2 GB minimumAvailable hard-d iskspace [a] 2 GB available hard-disk spaceDisplay Resolution 1024 × 768Input Device Mouse or a compatible pointing deviceBrowser Microsoft ® Internet Explorer 7 or greaterChassis A PXIe or PXI-H chassis peripheral slotEmbedded Controller A Keysight embedded controller running one of the above operating systems.Note: The embedded controller must be compatible with the Keysight chassis.Remote Controller A desktop/laptop PC running one of the above operating systems and a Keysight interface cable(e.g. Y1202) with PCIe (desktop) or ExpressCard (laptop) interface card.[a] Because of the installation proced ures, less memory may be required for the operation than is required for theinstallation.