Keysight Technologies N5249A Configuration Manual

Also see for N5221A: Service guide

Keysight Technologies N5249A Configuration Manual Manual pdf 28 page image

Page 28Find us at www.keysight.comFor devices with 1.0 mm connectorsMechanical calibration/verification kit85059A DC to 110 GHz precision calibration/verification kit.Includes:– 85059-60003 1.00 mm (m) short 2.450 mm– 85059-60007 1.00 mm (f) short 2.450 mm– 85059-60004 1.00 mm (m) short 3.000 mm– 85059-60008 1.00 mm (f) short 3.000 mm– 85059-60002 1.00 mm (m) short 1.825 mm– 85059-60006 1.00 mm (f) short 1.825 mm– 85059-60001 1.00 mm (m) short 1.300 mm– 85059-60005 1.00 mm (f) short 1.300 mm– 85059-60009 1.00 mm male open– 85059-60010 1.00 mm female open– 85059-60019 1.00 mm male load– 85059-60020 1.00 mm female load– 85059-60021 1.00 mm lossy delay line– 11920-60001 1.00 mm (m) to 1.00 mm (m) adapter– 11920-60002 1.00 mm (f) to 1.00 mm (f) adapter– 11920-60003 1.00 mm (m) to 1.00 mm (f) adapter– 11500-60001 1.00 mm (f) to 1.00 mm (f) 8.8 cm cable– 85059-60016 1.00 mm mismatch thru adapter forverification– 85059-60017 1.00 mm matched thru adapter forverification– 8710-2079 6 mm, 4 in-lb torque wrench– 8710-2156 6 mm open end wrenchCables– 11500I 1.0 mm (f-f) test port cable (8.8 cm)– 11500J 1.0 mm (m-f) test port cable (16.0 cm)1– 11500K 1.0 mm (m-f) test port cable (20.0 cm)1– 11500L 1.0 mm (m-f) test port cable (24.0 cm)1Adapter set– V281C 1.0 mm(f) to V-band waveguide adapter– V281D 1.0 mm (m) to V-band waveguide adapter– W281C 1.0 mm (f) to W-band waveguide adapter– W281D 1.0 mm (m) to W-band waveguide adapter– 11920A 1.0 mm (m) to 1.0 mm (m) adapter– 11920B 1.0 mm (f) to 1.0 mm (f) adapter– 11920C 1.0 mm (m) to 1.0 mm (f) adapter– 11921A 1.0 mm (m) to 1.85 mm (m) adapter– 11921B 1.0 mm (f) to 1.85 mm (f) adapter– 11921C 1.0 mm (m) to 1.85 mm (f) adapter– 11921D 1.0 mm (f) to 1.85 mm (m) adapter– 11922A 1.0 mm (m) to 2.4 mm (m) adapter– 11922B 1.0 mm (f) to 2.4 mm (f) adapter– 11922C 1.0 mm (m) to 2.4 mm (f) adapter– 11922D 1.0 mm (f) to 2.4 mm (m) adapter– 11923A 1.0 mm (f) connector launch assemblyFor devices with 1.85 mm connectorsMechanical calibration kit85058B standard: DC to 67 GHz. Includes:– 85058-60101 1.85 mm (m) short 5.4 mm– 85058-60102 1.85 mm (m) short 6.3 mm– 85058-60103 1.85 mm (m) short 7.12 mm– 85058-60104 1.85 mm (m) short 7.6 mm– 85058-60105 1.85 mm (f) short 5.4 mm– 85058-60106 1.85 mm (f) short 6.3 mm– 85058-60107 1.85 mm (f) short 7.12 mm– 85058-60108 1.85 mm (f) short 7.6 mm– 85058-60109 1.85 mm male open– 85058-60110 1.85 mm female open– 85058-60111 1.85 mm male load– 85058-60112 1.85 mm female load– 85058-60113 1.85 mm (m) to 1.85 mm (m) adapter– 85058-60114 1.85 mm (f) to 1.85 mm (f) adapter– 85058-60115 1.85 mm (m) to 1.85 mm (f) adapter85058E economy: DC to 67 GHz. Includes:– 85058-60101 1.85 mm (m) short 5.4 mm– 85058-60105 1.85 mm (f) short 5.4 mm– 85058-60109 1.85 mm male open– 85058-60110 1.85 mm female open– 85058-60123 1.85 mm male load– 85058-60124 1.85 mm female load– 85058-60113 1.85 mm (m) to 1.85 mm (m) adapter– 85058-60114 1.85 mm (f) to 1.85 mm (f) adapter– 85058-60115 1.85 mm (m) to 1.85 mm (f) adapterElectronic calibration kitsN4694A Microwave ECal: 10 MHz to 67 GHz, 2-ports Includes:– Option M0F module with:N4694-60001 1.85 mm (f) to 1.85 mm (m) ECal module– Option 00M module with:N4694-60002 1.85 mm (m) to 1.85 mm (m) ECal module– Option 00F module with:N4694-60003 1.85 mm (f) to 1.85 mm (f) ECal module– Option 00A adds:– 85058-60113 1.85 mm (m) to 1.85 mm (m) adapter– 85058-60114 1.85 mm (f) to 1.85 mm (f) adapterCables– N4697E2 Single, flexible:1.85 mm (f) to 1.85 mm (f), 96.5 cm, 38 inches– N4697F2 Set, flexible:– One 1.85 mm (f) to 1.85 mm (f) cable, 62.2 cm, 24.5 inches,p/n N4697-60100– One 1.85 mm (f) to 1.85 mm (m) cable, 62.2 cm, 24.5 inches,p/n N4697-60200– N4421B-K67 Single, flexible:1.85 mm (f) to 1.85 mm (m), 91.4 cm, 36 inchesAdapter set– 85130H2 1 85 mm to 1 85 mm1 For on-wafer applications, two 11500J/K/L cables are required; one cablefor each test port.2 Special rugged female connector specifically for connecting to thenetwork analyzer test port, but does not mate with a standard maleconnector.