96N9030B PXA Signal Analyzer Service GuideInstrument MessagesEvent Messages–300 to –399, Device-Specific Errors–440Query UNTERMINATED afterindefinite responseA query was received in the same program message after a queryrequesting an indefinite response was executed.Err#MessageVerbose/Correction Information–300Device-specific errorAn instrument error occurred and the exact problem cannot be specificallyidentified. Report this error to the nearest Keysight Technologies sales orservice office.–310System error;An internal system-type error has occurred. The exact problem cannot bespecifically identified. Report this error to the nearest KeysightTechnologies sales or service office.–310System error; Alicense will soonexpire;will expire in The indicated feature/software will expire in the specified time. ContactKeysight Technologies to purchase continued use of this functionality.–310System Error; enableGPIB controller modePress System, I/O Config, GPIB and set GPIB Controller to Enabled so thatthe analyzer can control the source over GPIB–310System error; Errortransmitting a LANevent to the network.Communication with the network driver failed.–310System error; Failedto initialize the PTPclock to currenttime.Failure communicating with the DMC libraries’ PTP controller.–310System error; Failedto instantiate thePTP ordinary clock.Failure in the starting up the DMC libraries’ PTP controller.–310System error; feature notlicensedThe specified feature, for example “N9073A-TR2” is not licensed. Thelicense may have expired. You cannot use it until you get a license.–310System error; Featureexpired; code>The specified feature has expired. The license is no longer valid.–310System error; Licenseinstallationfailed;The license installation of the specified feature, for example“N9073A-TR2”, has failed. You should refer to the event log in the controlpanel for more details.–310System error; Licenseremoval failed;The license removal of the specified feature, for example “N9073A-TR2”has failed. You should refer to the event log in the control panel for moredetails.Err#MessageVerbose/Correction Information
