Keysight Technologies PXA N9030A Getting Started Manual

Also see for CXA N9000A: Installation note Measurement guide

Contents

Keysight Technologies PXA N9030A Getting Started Manual Manual pdf 58 page image

58Instrument Operating SystemWindows ConfigurationSettings that must not be changedAvoid changing the settings described below (available from the WindowsControl Panel). Changes to these settings may degrade instrumentperformance, screen displays, and measurement speed.Add the Instrument to a networkInstall and configure a printerSet the time and dateIf you click on “Advanced System Settings” a dialog will open called“System Properties.” On this dialog there is an “Advanced” tab, whichopens up a dialog with a number of settings options. One of these is“Performance”, and if you click on the “Settings” button under“Performance”, you will see another dialog with a number of settingsoptions. The default is “Let Windows choose what’s best for mycomputer.” You can also select “Adjust for best performance.”You should leave the remaining selections unchanged.You May Use This Feature: To Do This…Do NOT Use This Feature: To Do This…Do not change Power Options.If you click on “Advanced System Settings” a dialog will open called “SystemProperties.”On this dialog there is a tab called “Hardware.” You should not modify anysettings under the “Hardware” tab.On this dialog there is also a tab called “Advanced.” You should not modify anysettings under the “Advanced” tab except as described above under “Settingsthat can be changed”.Do not remove installed Fonts