Keysight Technologies VXI bus 75000 C Series Configuration And User's Manual

Also see for VXI bus 75000 C Series: Service guide User manual

Contents

Table Of Contents
Table Of Contents
Using the IEEE 1394 Serial Bus in VXI Systems
Using this Manual
Using this Chapter
Connecting the Power Cable
Where to go Next
Connecting the E8491B to the Host Adapter
Installing C-size Instruments
Installing A- and B-size Instruments
Step 4: Installing the Keysight I/O Libraries
Editing the E8491B Configuration
Editing the E8491B Configuration on Windows 95 Platforms
Step 5: Installing Keysight VXIplug&play Instrument Drivers
Step 6. Verifying the Installation
Viewing the Resource Manager Output
Troubleshooting Installation Problems
Keysight VXIplug&play
Block Data Transfers
Block Transfers using Keysight VISA
Keysight E8491B Triggering
Configuring the E8491B Trig In and Trig Out Ports
Trigger Pull Up
Locating E8491B Shared Memory
Example Programs
Storing Readings in Shared Memory - Keysight VISA Example
Storing Readings in Shared Memory - SICL Example
IEEE 1394 Topology and Terminology
Features of the IEEE 1394 Bus
Optimizing the Configuration
IEEE 1394 Data Transfer Protocol
Asynchronous Data Transfers
OHCI-Compatible Host Adapter and Interface Cable
The Keysight E8491B PC to VXI Interconnect
The Keysight I/O Libraries
Interface Characteristics
VXI Characteristics
External Trigger Output
Introduction
The names.cf Configuration File
The dynamic.cf Configuration File
The vximodel.cf Configuration File
Using iclear

88 Keysight E8491B IEEE 1394 PC Link to VXI User GuideEditing the Keysight E8491B Resource Manager Configuration IntroductionUsing iclearThe iclear function is used to clear the interface (E8491B) or individualmessage-based instruments in the VXI mainframe. iclear is executed from theDOS command prompt (..\siclnt\bin or \sicl95\bin directory) as:iclear SICL interface name is the name (vxi) listed in the ‘I/O Config’ SICLInterface Name window. logical address is the address of themessage-based VXI instrument to be cleared.If a logical address is not specified, the (E8491B) interface is cleared and theresource manager is started.Figure B-4 Output of ivxisc (cont’d).

/ 88

This manual is suitable for:

VXI bus 75000 C Series E8491B

manualsdatabase

Your AI-powered manual search engine