Kiramek 1460 series Owner's Manual
                                            | |
6VISION 1460 INSTALL GUIDESYSTEM WIRING DIAGRAM3-wireHarness ALWAYS tape/cover all wires thatyou do not use. Prevent shorts!There are two GREEN wires.DON’T CONFUSE THEM!REDOptionalRemote** Connector for the Antenna Unit of the optional TR537S 2-way Paging Remote or TR365 1-Way Remote.When adding an optional remote, you must learn the remote to the 1460. Refer to the User Guide that comeswith the TR537S or TR365 for details.1 Output used to control an optional starter kill relay (p/n: 896H-1B) and/or optional LED scanners (LUMINATOR).2 Some cars require use of the optional DSS-6 wire splitter to easily connect to multiple locations.3 This optional (+) input behaves exactly like the (–) WHT input. See Owner’s Guide page 9 for details.4 Some cars require the use of an optional relay to invert the polarity of this wire to (+)12v.5 Only used when using the optional TR537S paging system. Long press of TrunkOpen button triggers (-) output.5AFuseBRNYEL (–) GWA Output1 (500mA)BLK (–) Ground InputWHT (–) Door/Trunk Input2REDGRN/WHT(+)12v Power Input(+)12v Ignition Input(+)12v Siren Output (2A)WHT/REDGRNBLU/YEL (+)12v Door UNLOCK inputGRN/YEL (+)12v Door LOCK input(+)12v Hazard Light Input(+)12v Trunk Release InputGRNWHT/BLKRED/WHT (–) Pager CH. Output5 (150mA)(–) Park. Light Output 4 (150mA)(+)12v Trigger Input 3LEDProgramSwitchProgramSwitchLED6-wireMAINHARNESS4-wireHarnessShockSensorVISIONIR SHOCK SENSOR |
Related manuals for Kiramek 1460 series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine