Kiramek VISION 2460 Series Owner's Manual
                                            | |
VISION 2460 OWNER’S GUIDE3Arming & disarmingARMINGCONFIRMATION CHIRPSNORMAL ARMINGClose all doors and then LOCK by your factorykeyless remote or by SmartKey door handletouch. Parking lights may flash, doors will lock,and the horn/siren will chirp 1 time (if ConfirmationChirps are ON). The Status LED will light for 5s, dur-ing which time all triggers are disabled. Then the Sta-tus LED will start flashing and Ignition, Door, Trunkand Hood triggers become enabled. The Shock Sensor (and any other exter-nal sensor) is enabled 5s after the LED starts flashing (10s after you Lock).SENSOR BYPASS ARMING (2460H does not include a shock sensor)This procedure lets you temporarily disablethe Shock Sensor (2460B) for a single Armingsession:1) With Ignition OFF, press the Program Switch twice.2) Within 20s, press LOCK on the factory remote to Arm.The system is now Armed in Sensor Bypass Mode, and all triggers are activeexcept the shock sensor and any other external sensors. Note that when youDisarm and then Arm again normally, the shock sensor will be enabled.(ON by default)This procedure lets you enable or disable theArm/Disarm chirps. (Note that the siren willstill go off when the 2460 is triggered.)1) With Ignition OFF, press the Program Switch once.2) Within 20s, press LOCK on the factory remote to Arm.The confirmation chirp state has now toggled and the system is Armed. Re-peat the above procedure to toggle the confirmation chirp state back again.PROGRAMMABLEVehicles without Factory Keyless require an optional remote.OFFOFFLOCK2 Pushes1 Push |
Related manuals for Kiramek VISION 2460 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine