Klein + HummelOperating Manual KPA Series English 18The Recall local preset command loads and applies one of the stored presets, chosen through an identical dialog.Please note that all the current amplifier settings are overwritten! Note that if you have already input a presetname, or if you have loaded a preset from local memory or smart card, the name is kept by the amplifier and usedas starting point for a new save preset operation. For example, suppose that you have loaded a preset named“18IN SUB 1” from a SC, and then you save it into local memory as shown infigure 25. In this case the menu showninfigure 26 asks you if you want to keep/edit that name (shownfigure 27) or if you would like to edit the name ofthe preset that is going to be overwritten (shownfigure 28). This is useful for copying presets from/to smart card.figure 25figure 26figure 27figure 28Hardware infoIn this screen you can view some information about the hardware of the amplifier:• S/N the serial number of the amplifier• HW ID the hardware identifier (always 00)if you push the ”more” button, you can view the other info• KFRNT the version number of the front panel• KCTRL the version number of the controller• KDSP the version number of the DSP board• K8 the version number K8 adapterif you push the ”more” button, you can view the other info• Lifetime the operating time of the amplifierSelect prese t # 3Existing PresetKe ep this na me ?18IN SUB 1Choose pre se t na me^18IN SUB 1Choose preset na me^Existing Pre
