L-Acoustics LA8 User Manual

Also see for LA4: Owner's manual User manual User manual

L-Acoustics LA8 User Manual Manual pdf 23 page image

LA8_UM_EN_9.0 w w w . l - a c o u s t i c s . c o m 235.2 Display5.2.1 Main screenOnce the start-up sequence has fully cycled (refer to section 5.1), the LCD displays the main screen:Figure 15: Main screen1. Preset memory number (1 to 255)Memory space containing the current presetThe preset can be a user preset or come from an on-board preset library (refer to section 5.3.3).2. Preset nameCopied from a preset library or entered by the user (if prior stored as a user preset).3. Last number in the IP address (1 to 254)Identifies the controller within the L-NET network (refer to section 5.2.3).4. Star signIndicates that parameters have been modified after the preset was last stored (refer to section 5.5).5. Output name and routingLabel placed above each output key, written in the xx_x format where: The first two characters indicate the type of transducer section or enclosure to be connected to the outputchannel:LF low frequency transducer section part of a 2 or 3-way loudspeaker enclosureMF mid frequency transducer section part of a 3-way loudspeaker enclosureHF high frequency transducer section part of a 2 or 3-way loudspeaker enclosurePA passive loudspeaker enclosureSB subwoofer enclosure installed with front face pointing towards the audienceSR subwoofer enclosure installed with front face pointing towards the direction opposite from the audience(part of a cardioid configuration) The last character indicates which input channel or input channel combination is selected to drive theoutput channel:A IN AB IN B+ sum of IN A and IN B (A+B)– difference between IN A and IN B (A-B)