L-Acoustics LA8 User Manual
Also see for LA4: Owner's manualUser manualUser manual
                                                | |
Contents
| 
LA8 AMPLIFIED CONTROLLERuser manualVERSION 9.0LA8_UM_EN_9.0 w w w . l - a c o u s t i c s . c o m 285.3.2 Main menuThe main menu gives access to the pages described in the following table. Please refer to the appropriate sections fordetailed instructions.LA NETWORK MANAGER softwareAll parameters in each amplified controller can also be set from LA NETWORK MANAGER software (refer tothe LA NETWORK MANAGER video tutorial).Table 4: Main menu descriptionPage Functionalities SectionLOAD PST USER load a user preset (memories 1-10)5.4LOAD PST FACTORY load a factory preset (memories 11-199)STORE PRESET save the current preset (including the current settings) as a user preset(memories 1-10) 5.5DELETE PRESET delete a user preset (memories 1-10) 5.6PRESET PARAMETERS set the gain, delay, polarity, and routing parameters 5.7CLEAR GRP PARAMS remove the group parameters defined in LA NETWORK MANAGERsoftware (name, gain, delay, and contour EQ) 5.8INPUT SETTINGS set the input mode, fallback mode and AES/EBU gain 5.9MONITORING & INFOdisplay real-time measured values: RMS output voltage and outputtemperature (in percentage of the maximum values)display the firmware and factory preset library versionsdisplay the controller’s MAC address5.10OPTIONSset the controller’s IP addressset the delay unit and LCD screen contrastreset all parameters to factory defaults5.11To select a menu page follow these steps (see Figure 23):Press and release the encoder wheel.Turn the encoder wheel clockwise or counterclockwise to scroll through the page names.Press the OK key or the encoder wheel to select a page or press the ESC key to return to the main screen.On the LCD screen two types of arrow cursors indicate how to navigatethrough the menus (see Figure 23):Position cursors (on the left) Start of a menu. Other functionalities can be displayed turning theencoder wheel clockwise. Middle of a menu. Other functionalities can be displayed turning theencoder wheel clockwise or counterclockwise. End of a menu. Other functionalities can be displayed turning theencoder wheel counterclockwise.Selection cursors (on the right) Another menu level or function can be accessed pressing the OK keyor the encoder wheel.Press the ESC key to return to the previous menu. No additional menu level or function exist.Turn the encoder wheel to access another menu or press the ESC key toreturn to the previous menu.Figure 23: Main menu |
Related manuals for L-Acoustics LA4
manualsdatabase
Your AI-powered manual search engine