L.B. White 320 Owner's Manual And Instructions

Also see for 320: Owner's manual and instructions

L.B. White 320 Owner's Manual And Instructions Manual pdf 12 page image

Vertical Convection Heaterswww.lbwhite.comOwner’s Manual • Workman & Norseman121. Remove the 7/16 hex head screw from undersideof pre-assembled burner. See Fig. 1.2. Install the burner assembly into the heater’s caseassembly. See Fig. 2.a. The burner head must be located between uprighttabs in heater’s base.b. Align tapped hole in burner casting (previously oc-cupied by hex head bolt) to mounting hole in base.c. Using a 7/16 in. nut driver or ratchet with 7/16 in.socket, securely fasten the burner assembly to thebase using the screw removed in step 1.3. Norseman 200 heaters: Push female terminal onelectrode wire securely onto male terminal of pushbutton igniter. See Fig. 2.FIG. 1FIG. 21. Apply a small amount of pipe thread sealant tothreads of rigid hose connection. Connect this endto to regulator outlet. See Fig. 3. Tighten securely.Workman 225 shown.2. Connect opposite end of hose with nut to safetycontrol valve of heater. See Fig.4. Tighten securely.(Workman 225 Plus shown.)FIG. 3FIG. 4Burner InstallationNorseman 200 Plus and Norseman 250Hose and RegulatorAssemblyPropane Gas Heaters7/16 SCREWAPPLY SEALANTUPRIGHTTABSNORSEMAN 200:ELECTRODE LEADCONNECTED TOPUSH BUTTONIGNITER7/16 IN. BURNERSCREWNORSEMAN 200:HOLE IN BAFFLEPLATENUT HAS LEFTHANDED THREADSNOTE:Norseman 200 & Norseman250 heaters use a hose withswivel nuts at both ends.• Connect one end to safetycontrol valve at heater.• Connect opposite end tohose adapter at regulatoroutlet.