L.B. White SENTINEL AT 150 Owner's Manual And Instructions

L.B. White SENTINEL AT 150 Owner's Manual And Instructions Manual pdf 13 page image

OUTLET ENDINSERT STRIP ASSEMBLYINTO LAST 10 FT OF TUBEINSERT STRIPASSEMBLY INTO LAST10 FT. OF TUBEOUTLET ENDAssemble the strips and insert into last tube. Edge of stripis flush with end of tube. See Fig. 9. Refer to Fig.10 forinstallation of vent hood.FIG. 9FIG. 10MANUAL SHUT-OFF VALVE, HOSE& REGULATOR ASSEMBLYREGULATORNIPPLEVALVE, MANUALSHUT-OFFGAS HOSEADAPTERSEDIMENT TRAPTO CONTROLVALVE INLETREGULATOR VENTGAS FLOW1. Assemble the components together. See Fig. 12.This view shows general assembly of thecomponents. The regulator must always be mountedso its vent, regardless of location on the regulator, isalways pointed downward. Ensure hose is positionedaway from the heater.2. Tighten all connections securely and check for gasleaks.FIG. 12SECOND STAGEREGULATOR13Assemble the tee, nipple, and cap to the nipple at the gasinlet of heater. See Fig. 11. Tighten securely. The sedimenttrap assembly must always be mounted in a verticalposition. Check all connections for gas leaks usingapproved gas leak detectors.FIG. 11TUBE VENT HOODPUSH FIRMLY ONTO END TUBEAIR TURBULATION STRIPS & VENT HOODSEDIMENT TRAP ASSEMBLYPUSH VENT HOOD FIRMLY ONTO END OFLAST TUBE, OUTLET DOWN. FLAPPER OFVENT HOOD MUST CLOSE COMPLETELY.PLEHOSE ADAPTERTEENIPPLECAPNIPPLEFROM HEATER