LAI Games Let’s Bounce Operator's Manual

Contents

LAI Games Let’s Bounce Operator's Manual Manual pdf 50 page image

50COIN OPTIONS REFERENCE GUIDEBy default, the coin door contains a micro switch connected to the COIN2 input for crediting themachine.A 9 way Molex connector has been installed on the coin door which can be optionally used to makeadaptors for most electronic coin systems and comparators.The following picture illustrates the connector pinout.Shell part number: Molex 03-09-1092Pins: Molex 02-09-1119 (loose)Molex 02-09-1117 (chain)PIN1 = GNDPIN2 = COIN1 inputPIN3 = 12VDCPIN7 = GNDPIN8 = COIN2 inputPIN9 = 12VDCContact your nearest LAI Games distributor for harnessing to suit different coin comparators and billacceptors.UNIVERSAL CARD LINK CONNECTIONA 9 pin Universal Card Link connector exists on the operator panel inside the coin door.Mating shell part number: Molex 9-pin housing: 03-09-2092Pins part number: Wire Gauge and Terminals: 02-09-2103 (14-20 gauge wire) or 02-09-2118 (18-22gauge wire)Pin 1. +12v- Supply to Card System.Pin 2. Coin 1- input to the game PCB.Pin 3. Coin 2- input to the game PCB.Pin 4. Coin meter 1- is connected to the coin meter 1 output from the game PCB and can be used bycard systems for monitoring purposes.Pin 5. Coin meter 2- is connected to the coin meter 2 outputs from the game PCB and can be used bycard systems for monitoring purposes.