LAVAMAT LS 84840 User Manual

LAVAMAT LS 84840 User Manual Manual pdf 15 page image

By pressing this button twice, the corresponding symbol and the message «SUPER QUICK»( SUPER QUICK ) will appear on the display and you will be able to reduce the cycle dura-tion. The display will show the reduced washing time.To be used only for very lightly soiled laundry.Select the START/PAUSE (button 7) ( START/PAUSE )Press this button, to start the selected programme. The corresponding red pilot light stopsblinking.On the display will appear the name and the running phase of the selected programme toindicate that the appliance starts operating and the door is locked.To interrupt a programme which is running, press the button 7: the corresponding red pilotlight starts to flash, while the display says that the appliance is in pause.To restart the programme from the point at which it was interrupted, press the button 7again.If you have chosen a delayed start, the machine will begin the countdown.Select the DELAY START (button 8) ( DELAY START )This option makes it possible to delay the starting of the washing programme by 30, 60, 90minutes, 2 hours and then by 1 hour till 20 hours.Selecting the delay time:• Select the programme and the required options,• Select the desired delay time by pressing the button 8, the display shows the delay valueand the relevant symbol 9.5.The estimated end of the programme time is displayed in 9.7.• Press the button 7: the machine starts its countdown displayed in 9.8. The programmewill start after the selected delay has expired.You can cancel the delay time at any moment, before you press the button 7.Cancelling the delayed start:• set the appliance to PAUSE by pressing the button 7,• press the button 8 until the symbol disappears on the display,• press the button 7 again to start the programme.The DELAY START option can not be selected with DRAIN or SPIN programmes.Altering an option or a running programmeIt is possible to change some options before the programme carries them out. Before youmake any change, you must pause the appliance by pressing the button 7.Changing a running programme is possible only by resetting it. Turn the programme selec-tor dial to and then to the new programme position. Press the button 5 to cancel theprevious washing programme. Start the new programme by pressing the button 7 again.The washing water in the tub will be not emptied out.Interrupting a programmePress the button 7 to interrupt a programme which is running, the corresponding lightstarts blinking. Press the same button again to restart the programme.Daily use 15Downloaded From WashingMachine-Manual.com Manuals