LAZBOY Platinum Luxury-Lift Series Operating Instructions Manual

Also see for Platinum Luxury-Lift Series: Operating instructions

Contents

LAZBOY Platinum Luxury-Lift Series Operating Instructions Manual Manual pdf 14 page image

Platinum Luxury-Lift ®Additional Operating FeaturesPower Supply Over-Current ProtectionThe Platinum series lift chairs are equipped with over-current protection. This feature prevents damageto the motors and electronics if there is an overload, short circuit or ground fault. Should the systemdetect an over-current, the system shuts down and the chair stops functioning.If the over-current protection is activated, stop pressing the button or toggle in use. The system shouldreset automatically. If you believe the chair is not being overloaded, or experiencing a short circuit orground fault, you may restart the function of the chair after the button or toggle has been released.Should the over-current protection trip repeatedly, refer to the Troubleshooting section in this manual.Additionally, the power supply includes a green LED status light to indicate power is being suppliedto the system. If the light is not illuminated, no power is being supplied to the system. Refer to theTroubleshooting section in this manual if the power supply is plugged in, but the green light isnot illuminated.– To reduce the risk of serious injury:• Do not attempt to disassemble or service the pump or motor; no serviceable parts areinside. Contact your La-Z-Boy ® dealer for service.• Check the condition of the power supplies, electrical cords, plugs, and connectorsmonthly. Keep the power supplies and electrical cords away from heat sources.Never operate the unit with a damaged power supply, electrical cord, plug, or connector.Contact your La-Z-Boy ® dealer for service.• The 1PL, 1PM and 1PH lift chairs are intended for a single occupant, not exceeding 350pounds. Do not operate the chair with more than one occupant in or on any part of the chair.WARNINGTroubleshooting for Legrest OperationIf the legrest stops moving while closing, and all other functionality of the lift chair is operating,the legrest may have encountered an obstruction.1. Check to make sure there are no obstructions. Lift and hold the legrest up, look for obstructionsand remove them.2. The legrest uses spring tension to close, and will close quickly when the obstruction isremoved and the legrest is released. Release the legrest slowly to prevent it from slamming shut.If there are no obstructions and the legrest still does not close properly, contact your La-Z-Boy ®dealer for service.Troubleshooting for Lift and Recline OperationIf the lift or recline features do not work, check the following:1. Make sure the 120 volt power cord is plugged into an electrical outlet.2. Check the power supply to make sure the green LED power indicator light is on.3. Make sure the electrical outlet is working. For example, make sure there are no blownfuses or tripped circuit breakers.4. Make sure all the connections are secure; refer to the Assembly Instructions.5. Make sure the electrical cords are not crimped or pinched. Make sure the electriccord or plug is not damaged.6. Make sure the operating capacity has not been exceeded and there is only oneoccupant in the chair; refer to the Operating Instructions.Platinum Luxury-Lift ®Troubleshooting(Troubleshooting Continued)2726