LAZBOY Platinum Luxury-Lift Series Operating Instructions Manual

Also see for Platinum Luxury-Lift Series: Operating instructions

Contents

LAZBOY Platinum Luxury-Lift Series Operating Instructions Manual Manual pdf 16 page image

31301PH Platinum Luxury-Lift ® Hand WandInstallation Instructions1PH Platinum Luxury-Lift ® Hand WandRemoval Instructions– To reduce the risk of burns, fire, electric shock,serious injury or death:• Unplug the power cord before connecting or disconnecting the hand wand.WARNING1. Unplug the 120 volt power cord from the electrical outlet.2. Stand behind the chair and disconnect the power supply from the chair. Locate the connectionbehind the chair, push down the locking tab and pull the connectors apart (F IGURE 1).3. From the front of the chair, locate the hand wand connection on the seat. Open the lockingcover and gently pull the connection apart to separate the hand wand from the body (F IGURE 2).Store the hand wand out of reach of children.F IGURE 2F IGURE 1Power Supply Connection Hand Wand Connection with Locking Cover– To reduce the risk of burns, fire, electric shock,serious injury or death:• Unplug the power cord before connecting or disconnecting the hand wand.WARNING1. Unplug the 120 volt power cord from the electrical outlet.2. Stand behind the chair and disconnect the power supply from the chair. Locate the connectionbehind the chair, push down the locking tab and pull the connectors apart (F IGURE 1).3. From the front of the chair, locate the hand wand body connector near the back of the seat.Align the arrow on the hand wand connector to the arrow on the body connector and pushtogether until fully seated, THEN back the connection out slightly (F IGURE 2). Close the lockingcover to secure the connection. (F IGURE 3).4. Connect the power supply to the chair.F IGURE 2F IGURE 1F IGURE 3Hand Wand Connectionsecured with LockingCover closed– To reduce the risk of electric shock, serious injuryor death:• Plug directly into a wall outlet. Do not use an extension cord, adapter or surge protector.DANGER5. Plug the 120 volt power cord directly into the electrical outlet.Fully seat theConnectors,then back outslightly beforeclosing theLocking CoverPower Supply Connection