La Crosse Technology WS-7038U Instruction Manual

Also see for WS-7038U: Instruction manual Instruction manual

Contents

La Crosse Technology WS-7038U Instruction Manual Manual pdf 11 page image

11II) THE WIRELESS RAIN MONITORThe Rain Monitor can also be mounted in two ways:• with the table stand or,• on the wall with the use of a wall hanging screw (not included).A) USING THE TABLE-STAND1. The Rain Monitor comes with the table stand already mounted. If youwish to use the table-stand all that is required is to place the RainMonitor in an appropriate location.B) WALL MOUNTING1. Remove the table stand. To do this,pull down on the stand from the rearand rotate forward. (Figure 3).2. Fix a screw (not included) into thedesired wall, leaving approximately3/16 of an inch (5mm) extended fromthe wall. (Figure 4).3. Place the Rain Monitor onto the screwusing the hanging hole on thebackside. Gently pull the RainMonitor down to lock the screw intoplace.MAINTENANCE & CARE• Extreme temperatures, vibrations, and shock should be avoided to prevent damage tothe units.• Clean displays and units with a soft, damp cloth. Do not use solvents or scouringagents—they may mark and damage the displays and casings.• Do not submerge in water.• Immediately remove all low powered batteries to avoid leakage and damage.Replace with new batteries only, and of recommended size.• Opening the casings invalidates the warranty. Do not try to repair the units. ContactLa Crosse Technology for Repairs.Figure 3Figure 4