La Crosse Technology WS-7059-SU Instruction Manual

Contents

La Crosse Technology WS-7059-SU Instruction Manual Manual pdf 7 page image

7ManuallyThis is only necessary if you do not wish to wait forthe WWVB reception. All manual set time and datesettings will be over-ridden by the reception of theWWVB signal. In most cases all that needs to be setdifferent from the default (factory) settings is thetime zone (section “D” following) and the pressure(section “K” following), which must be set to yourcurrent pressure.PROGRAMMING SEQUENCE Default (Factory) SettingA. LCD Contrast LCD 5B. 12/24-hour Mode 12hC. Hour Setting 12: AMD. Minute Setting :00E. Time Zone Setting -5 (EST)F. Daylight Saving Time ON/OFF 1 (ON)G. Year Setting 2000H. Month Setting 1 (January)I. Date Setting 1J. Degree Setting °F / °C °FK. Weather Forecast Sensitivity 3L. Pressure Readout rel inHgM. Setting the Pressure 29.91A. SETTING THE LCD CONTRAST1. Press and hold the “MODE/SET” button for 5seconds or until “Lcd 5” flashes in the time Lcd.2. There are 7 Lcd contrast levels to choose from –“Lcd 1” is the lightest and “Lcd 7” is the darkest.3. Press the “CH/+” button to toggle through to yourdesired setting.4. Press the “MODE/SET” button to confirm andadvance to 12/24 hour time setting.