La Crosse Technology WS-8010U Instruction Manual
                    | |
17TROUBLESHOOTINGProblem: No reception of WWVB time signal.Solution: 1) Wait overnight for signal.2) Be sure Weather Center is at least 6 feet from any electrical devices, suchas televisions, computers, or other radio-controlled clocks.3) Remove batteries for 5 minutes, reinsert and leave the unit aloneovernight without pressing buttons.4) If there are still problems, contact La Crosse Technology.Problem: Hour is incorrect (minute and date are correct).Solution: Be sure correct time zone and daylight saving time are selected.Problem: The LCD is faint.Solution: 1) Set the LCD contrast to a higher level.2) Replace batteries.Problem: No outdoor temperature or humidity is displayed.Solution: 1) Remove all batteries, reinsert into sensor first, then Weather Center.2) Place remote sender closer to display.3) Be sure all batteries are fresh.4) No other interfering sources on a 433MHz frequency are being used(such as computer monitors, TV sets, headphones, or speakers) in thevicinity.Note: For problems not solved, please contact La Crosse Technology.MAINTENANCE & CARE• Extreme temperatures, vibrations, and shock should be avoided to prevent damage tothe units.• Clean displays and units with a soft, damp cloth. Do not use solvents or scouringagents—they may mark and damage the displays and casings.• Do not submerge in water.• Immediately remove all low powered batteries to avoid leakage and damage.Replace with new batteries only, and of recommended size.• Opening the casings invalidates the warranty. Do not try to repair the units. ContactLa Crosse Technology for Repairs. |
Related manuals for La Crosse Technology WS-8010U
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine