La Crosse Technology WS-8035U Instruction Manual

Also see for WS-8035: Instruction manual

Contents

La Crosse Technology WS-8035U Instruction Manual Manual pdf 9 page image

95. Press and release the “+” button to select the desired time zone.6. Press and release the “SET” button to confirm the Time Zonesetting and continue to the DST ON/OFF setting.D. DST ON/OFF Setting1. Press and hold the “SET” button for five seconds.2. “lcd” will appear at the top of the display and a number will flashnext to it.3. Press and release the “SET” button twice more to advance to theDST ON/OFF setting.4. “DST” will appear to the right of the Moon Phase display and“ON” or “OFF” will flash above that.5. Press and release the “OUT/+” button to select DST ON/OFF.Note: Some locations (Arizona and parts of Indiana) do not follow DaylightSaving Time.6. Press and release the “SET” button to confirm the DST ON/OFFsetting and continue to the Radio-controlled Time ON/OFF setting.E. Radio-controlled Time ON/OFF Setting1. Press and hold the “SET” button for five seconds.2. “lcd” will appear at the top of the display and a number will flashnext to it.3. Press and release the “SET” button three more times to advance tothe Radio-controlled time ON/OFF setting.4. “RCC” will appear to the right of the Moon Phase display and“ON” or “OFF” will flash above that.5. Press and release the “+” button to select Radio-controlled timeON/OFF setting.6. Press and release the “SET” button to confirm the Radio-controlled time ON/OFF setting and continue to the 12/24-hourTime Mode setting.F. 12/24-hour Time Mode1. Press and hold the “SET” button for five seconds.2. “lcd” will appear at the top of the display and a number will flashnext to it.3. Press and release the “SET” button four more times to advance tothe 12/24-hour time mode setting.4. “12h” or “24h” will flash to the right of the Moon Phase display.5. Press and release the “OUT/+” button to select 12 or 24-hour timemode.Note: In 12h mode “PM” will appear to the left of the time during PM hours.If the time is not within the PM hours nothing will be displayed. Be sure to setthe time to the correct AM/PM time to ensure automatic reception.