La Crosse Technology WS-9035TWC Instruction Manual

Contents

La Crosse Technology WS-9035TWC Instruction Manual Manual pdf 10 page image

10Sunny—indicates that the weather is expected to improve (not that the weather will be sunny).Sun with Clouds—indicates that the weather is expected to be fair (not that the weather will be sunny with clouds).Clouds with Rain—indicates that the weather is expected to get worse (not that the weather will be rainy).These icons indicate the expected weather change in the next 12 to 24 hours. The icon does not give an exactprediction of the weather, however it should be viewed as a generalization of the expected weather change (forexample a “sunny” icon indicates the weather is expected to improve).The weather icons change when the unit detects a change in air pressure. The icons change in order, from “sunny”to “partly sunny” to “cloudy” or the reverse. It will not change from “sunny” directly to “rainy”, although it ispossible for the change to occur quickly. If the symbols do not change then the weather has not changed, or thechange has been slow and gradual.B. WEATHER TENDENCY ARROWSOther possible displays in the FORECAST LCD are 2 weather tendency arrows, one that points up (on the left sideof the LCD) and one that points down (on the right side of the LCD). These arrows reflect current changes in theair pressure. An arrow pointing up indicates that the air pressure is increasing and the weather is expected toimprove or remain good, an arrow pointing down indicates that the air pressure is decreasing and the weather isexpected to become worse or remain poor. No arrow means the pressure is stable.II. INDOOR TEMPERATURE, HUMIDITY, AND COMFORT LEVEL INDICATORThe current indoor temperature and relative humidity are displayed in the INDOOR LCD.The comfort level indicator is located at the bottom left of the INDOOR LCD. The indicator will display a happy face iconwhen the temperature is between 68°F and 79°F (20°C and 25.9°C), and the humidity is between 45% and 64%. A sad faceicon will be displayed when the temperature and humidity are outside the mentioned ranges.III. OUTDOOR TEMPERATURE AND HUMIDITYThe temperature and humidity received from the remote temperature/humidity sensor is viewed in the OUTDOOR LCD.IV. MINIMUM AND MAXIMUM TEMPERATURE RECORDSThe WS-9035U keeps a record of the MINIMUM and MAXIMUM temperature, and the time and date of their occurrence,for both the indoor and outdoor modes.A. VIEWING THE INDOOR TEMPERATURE RECORDS1. Press and release the IN/HR button once. “MAX” appears to the right of the indoor temperature, indicating thatthe maximum temperature (along with the humidity measured at that time) and the time and date of occurrenceare displayed. The maximum records will display for 30 seconds before returning to the normal display mode.2. Press and release the IN/HR button again (once while “MAX” is still displayed, twice otherwise). “MIN”appears to the right of the indoor temperature, indicating that the minimum temperature (along with thehumidity measured at that time) and the time and date of occurrence are displayed.3. While “MIN” is still displayed press and release the IN/HR button again to return to the current data display.Or you can wait 30 seconds, during either the minimum or the maximum readings, and the unit willautomatically return to current data readings.B. VIEWING THE OUTDOOR TEMPERATURE RECORDS1. Press and release the OUT/MIN button once. “MAX” appears above the outdoor temperature and the LCD willflash, indicating that the maximum temperature, and the time and date of occurrence are displayed. Themaximum records will display for 30 seconds before returning to the normal display mode.