La Marche DCPS Installation And Operation Manual
Also see for DCPS: Installation and operation manual
                                        | |
Contents
| 
23Main Menu Second-Level MenuThird-Level MenuFourth-Level MenuDefault Value Setting ValueCapacityOtherParametersInstallationTime2010-01-01 Set to the current dateTable 12 – Setting Battery Parameters5.5 (Optional) Setting the Hibernation ParameterCAUTION:Before hibernating rectifiers, ensure that the upper-level circuit breaker can endure a current greaterthan the maximum input of the power system.Set Hibernation enable to Enable if you need to use the intelligent hibernation function of the rectifiers.Main Menu Second-LevelMenuThird-LevelMenuDefault Value Setting ValueParametersSettingsEnergy Saving HibernationEnableNo No/YesTable 13 – Setting the Hibernation Parameter5.6 Setting Communication Parameters5.6.1 Setting Parameters before Using the SNMP ManagementProcedureStep 1 Apply to the site or equipment room network administrator for a fixed IP address.Step 2 Set the IP address, subnet mask, and gateway on the LCD of the DCSC, as described in thetable below.Main Menu Second-Level Menu Third-Level Menu Default Value Setting ValueSetting Wizard Network Parameters IP Address 192.168.0.10 Set this parameterbased on the addressassigned by thenetwork administrator.Subnet Mask 255.255.255.0 Set this parameterbased on the addressassigned by thenetwork administrator.Default Gateway 192.168.0.1 Set this parameterbased on the addressassigned by thenetwork administrator.Table 14 – IP ParametersStep 3 Connect the network port on your laptop to the FE port on the DCSC by using a network cable. |
Related manuals for La Marche DCPS
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine