La Marzocco GB/5 Software Programming Manual

Also see for GB/5: Update guide Technical bulletin Technical bulletin Technical bulletin Operating manual

Contents

La Marzocco GB/5 Software Programming Manual Manual pdf 4 page image

English3www.lamarzocco.com Version 1.3GB/5 - FB/80DescriptionF ir e nz e - It a li aDisplay Operating ProcedureAccessing Programming ModeProgramming ModeLaMarzocco 09:30• To change any configurable parameter the operatormust first enter into the programming mode.• There are several levels within the programmingmode that allow the restriction of specific parametersdepending upon the password entered.The four programming levels are as follows:• Barista Level - No Password Necessary. Limitedparameters are available.• Technician Level - Technician password needed.Barista level parameters plus additionalparameters are available.• Factory Level - Factory password needed. BaristaLevel and Technician level parameters plusadditional parameters are available.• Roaster Level - Roaster password needed. Aspecific set of parameters are made available onlyto those entering this password.Water VolumeProgrammingLaMarzocco 09:30Password?????Press and hold the button on the group 1 keypad. After approximately 5 seconds thefollowing display appears.1LaMarzocco 09:30This is the Barista Level. Press the button to scroll through the available parameters.2MODEWhen finished, press to exit programming mode.3ONOFFPress and hold the button on the group 1 keypad. After approximately 10 seconds thefollowing display appears.4Using a combination of the following buttons (the first 5 buttons on the group 1 keypad) enter theappropriate 5 digit password.5MODE ENTER+_The parameters available after entering the password are dependant upon the password entered.If a technician password is entered then the technician level parameters will be madeavailable....etc. Press to scroll through the available parameters.6 MODEWhen finished, press to exit programming mode.7ONOFF