LaCie 12big Rack Storage ServerUser Manual page 39BIOS Settings6.3.4.3. IDE Configuration Sub-MenuTable 30 - IDE Configuration Sub-MenuFeature Options Description Setup HelpPrimary IDE Master N/A Press Enter to go to sub screen “Primary IDE Master”. While entering setup, BIOSauto detects the presence ofIDE devices. This displays thestatus of auto detection ofIDE devices.Primary IDE Slave N/A Press Enter to go to sub screen “Primary IDE Slave”.Secondary IDE Master N/A Press Enter to go to sub screen “Secondary IDE Master”.Secondary IDE Slave N/A Press Enter to go to sub screen “Secondary IDE Slave”.Hard Disk Write Protect ✦ Enabled✦ DisabledDisable/Enable device write protection. This will be effec-tive only if device is accessed through BIOS.IDE Detect Time Out (Sec) ✦ 0✦ 5✦ 10✦ 15✦ 20✦ 25✦ 30✦ 35Select the maximum time out value for detecting ATA/AT-API device(s).6.3.4.4. Primary/Secondary IDE Master/Slave Sub-MenusTable 31 - Primary IDE Master sub-menuFeature Options Description Setup HelpDevice DevicetypeDisplays the type of device (Hard Disk, CD-ROM orARMD).Vendor Disk ven-dor anddescriptionDisplays the device vendor name and/or model.Size X KB/MB/GBDisplays system memory size.LBA Mode SupportedNot Sup-portedDisplays whether LBA mode is supported by the device.Block Mode x Sectors Displays the Block mode size used by the device.PIO Mode 0-4 Displays the PIO mode used by the devices.
