LaCie 324 User Manual
                                  | |
Contents
| 
LaCie 324 LCD Monitor Getting ConnectedUser Manual page 42.1. Connecting the Monitor to Your ComputerTo attach the LCD monitor to your system, follow these instruc-tions:Power off your computer.Connect the signal cable (see Fig. 2.1-A):2a. For a PC or MAC with DVI digital output:Connect the DVI signal cable to the DVI connector on yourcomputer. Connect the other end of the DVI cable to the mon-itor’s DVI input. Tighten all screws.2b. For a PC or MAC with Analog output:Connect a 15-pin mini D-SUB to D-SUB signal cable (not in-cluded) to the 15-pin mini D-SUB connector on your computer.Connect the other end of this cable to the monitor’s D-SUB(VGA) input.2c. For a video source with HDMI output:Connect the HDMI signal cable to the HDMI connector on yourcomputer. Connect the other end of this cable to the monitor’sHDMI 1 or HDMI 2 input.TeChNICAl NOTe: Up to 4 video sources can be connectedto the monitor at the same time using the DVI, VGA, HDMI 1and HDMI 2 input ports.Connect the included audio cable to the monitor’s AUDIOIN port. If you are connecting two computers to the monitor,you can connect two audio cables to the monitor’s AUDIOIN ports. Video sources connected through HDMI require noadditional audio cable.Connect the other end of the audio cable to the AUDIO OUTterminal on your PC or Mac.NOTe: To keep the cables neatly organized, place them intothe cable management accessory that clips into place on theback of the LCD stand (Fig. 2.1-B).Connect one end of the power cord to the AC inlet on theback of the monitor and the other end to a power outlet.Push the power key to turn on the monitor, and turn on yourcomputer.1.2.3.4.5.6.HDMIAC IN PC-DIGITAL PC-ANALOG1 2 DVI-D AUDIO IN D-SUB AUDIO INLINE OUTFigure 2.1-AFigure 2.1-B2a 2b3 32c |
Related manuals for LaCie 130778 - 324 - 24" LCD Monitor
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine