LaCie 324I User Manual

Also see for 324i: Brochure & specs Quick install guide

LaCie 324I User Manual Manual pdf 19 page image

LaCie 324i LCD Monitor Getting ConnectedUser Manual page 192.3. VESA 100 Compliant Alternative StandThe base of the LaCie 324i is compatible with attachments thatare VESA 100 compliant. Prepare the VESA 100 compliant at-tachment (i.e. flexible monitor arm or stand) before disconnectingthe 324i from its original stand.Consider the following when using an alternative stand or attach-ment for your LaCie 324i monitor:✦ For safety reasons, please make sure that the stand cansupport the weight of the LaCie 324i LCD monitor (approxi-mately 11kg/25 lbs.).✦ To avoid damage to the monitor and the alternative stand,please use the screws that are included with the monitor.✦ Refer to the documentation that came with the VESA 100compliant alternative stand for instructions on how to at-tach the 324i.2.3.1. Remove the monitor stand formountingTo prepare the monitor for an alternate stand:1. Power off the monitor and your computer.2. Disconnect all cables from the monitor, including the powercable.3. Place hands on each side of the monitor and slide it up tothe highest position.4. To prevent any scratching or damage, spread a soft, non-abrasive cloth on a smooth and sturdy surface. Gently placethe monitor face on the non-abrasive surface.5. There are four screws that keep the 324i attached to its origi-nal stand. The screws may be found in the corners of thesquare plate on the back of the monitor (Fig. 14). To accessthem, use a small flathead screwdriver to remove the fourround covers that protect the screws. Please keep the screwcovers in a safe location in case you wish to reattach the324i to its original stand.6. Remove the four mounting screws from the holes in the stand(Fig. 14). Keep the screws in a safe location as you will mostlikely use them when placing the 324i on the alternativestand.continued on the next page>>Fig. 14