LaCie 5big network User Manual

Also see for 5big - Network NAS Server: Technical brief User manual Datasheet Datasheet Brochure & specs

Contents

LaCie 5big network User Manual Manual pdf 11 page image

LaCie 5big network Setting Up Your LaCie 5big networkUser Manual page 11The power supply kit is composed of two cables: one cable (A)connects to the LaCie drive; and the other cable (B) connects toa power outlet, such as a wall outlet or a surge protector.Connect Cable1. A to the 5big.Connect Cable2. B to the power supply brick (C).Connect Cable3. B to a surge protector or wall outlet.Turn on the drive by moving the power switch on the back of4.the drive to the “on” position.The 5big system may take up to 60 seconds to boot upCAUTION: Only use the AC adapter supplied with your spe-cific LaCie device. Do not use a power supply from anotherLaCie device or another manufacturer. Using any other powercable or power supply may cause damage to the device andvoid your warranty.Always remove the AC adapter before transporting your LaCiedrive. Failure to remove the adapter may result in damage toyour drive and will void your warranty.TeChNICAl NOTe: You may use your LaCie drive when in aforeign country thanks to its 100-240 Volt power supply. To beable to use this feature, you may need to purchase an appro-priate adapter or cord. LaCie accepts no responsibility for anydamage to the drive resulting from the use of an inappropriateadapter. Using an adapter other than one authorized by LaCiewill void your warranty.offoodesigned byneil poultonFigure 2.1Turning On the 5big2.1.