LaCie D2 User Manual
Also see for D2 BLU-RAY XL: SpecificationsUser manualQuick install guideBrochure & specsUser guide
                               | |
Contents
| 
Getting to Know Your AIT Drivepage 7LaCie d2 SCSI AIT Drive2.2 LaCie AIT Drive – ViewsFront View1 – Cartridge Slot DoorInsert your AIT cartridge in this door. As you insert the cartridge,the drive takes hold of it and loads it into the mechanism.2 – Eject ButtonPress this button to eject a cartridge. Do not attempt to eject thecartridge while the busy LED is blinking. Doing so may harm thecartridge and lead to data corruption or loss.3 – Busy LEDBlinks to show the drive is backing up or recovering data.4 – Tape LEDLights solid to show that a cartridge has been loaded.5 – Status LEDIndicates when the drive heads need cleaning.Back View1 – Power Supply ConnectorThis is where you plug in the AC adapter suppliedwith the drive. See 3. Setting Up Your LaCieAIT Drive for details on connecting the adapter.2 – SCSI Connectors - This is where you plug inthe SCSI cable furnished with your drive.3 – SCSI ID Switch - Select the SCSI ID for your drive bypushing the plus or minus signs to move the numbers upor down.4 – Frame Ground Terminal - Connect the ground terminals of other devices to the drive’s frame ground.5 – Ventilation Outlet - Helps to keep your drive cool during operation. Be sure not to block this opening when using your drive.143 5 253 2 1 |
Related manuals for LaCie D2 BLU-RAY XL
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine