LaCie Wireless Space • DESIGN BY NEIL POULTON IntroductionUser Manual page 111.5. Power Button FunctionsThe multi-function power button (1.4.2. Rear View) allows you toturn the device on/off, reboot, or revert the system to its defaultconfiguration.✦ Turn on the drive: Press and hold the power button for fiveseconds. The front light will turn on and then begin blinking.IMPORTANT INFO: The light may not offer a sign that the deviceis powering on while pressing the power button. It is recommendedto release the power button after five seconds, even if the light hasnot turned on.✦ Turn off the drive: Press and hold the power button for ap-proximately five seconds. When the light turns red, release thebutton. The Wireless Space will shut down.✦ Reboot the device when it is on:1. Press and hold the power button for five to ten seconds.2. The light will turn off. Continue to hold the button.3. Release the button when the light turns blue.✦ Reset to default when the Wireless Space is on:1. Press and hold the power button for ten to twenty seconds.2. Continue to hold the button as the Wireless Space reboots.3. Continue to hold the button as the light turns blue.4. Release the button when the light becomes solid red.5. The light will blink red. Immediately press the button again.6. It will only blink red for five seconds. If you don’t press thebutton while the red light is blinking, the drive will rebootnormally.IMPORTANT INFO: Use of the power button to reset the WirelessSpace should not delete files on the shares. For example, media filesstored on OpenShare will be accessible after a reset.IMPORTANT INFO: A power button reset will restore the WirelessSpace to its factory settings, including the version of firmware.
