User Manual of LV-N9808C8E Series NVR1239.1 Configuring General SettingsPurpose:Network settings must be properly configured before you operate NVR over network.Steps:1. Enter the Network Settings interface.Menu >Configuration>Network2. Select the General tab.Figure 9. 1 Network Settings Interface3. In the General Settings interface, you can configure the following settings: NIC Type, IPv4 Address, IPv4Gateway, MTU and DNS Server.If the DHCP server is available, you can click the checkbox of DHCP to automatically obtain an IPaddress and other network settings from that server.Note: For the LV-N9808C8E series NVR, you need to configure the internal NIC address, so that IPaddresses are assigned to the cameras connected to the PoE or built-in switch interfaces.Note: The valid value range of MTU is 500 ~ 9676.4. After having configured the general settings, click Apply to save the settings.
