LAARS’ ProtoNode Startup Guide• From the FST Web GUI’s landing page, click on “Setup” to expand the navigation tree and thenselect “Network Settings” to access the IP Settings menu. (Figure 18)• Enter the new IP address for the ProtoNode’s Ethernet port in the “N1 IP address” field.• If necessary, change the Subnet Mask setting in the “N1 Netmask” field.• If necessary, change the IP Gateway setting in the “Default Gateway” field.• Note: If the ProtoNode is connected to a router, the IP Gateway of the ProtoNode should beset to the IP address of the router that it is connected to.• Click the “System Restart” button at the bottom of the page to apply changes and restart theProtoNode.• Unplug Ethernet cable from PC and connect the ProtoNode to the network hub or router.• Record the IP address assigned to the ProtoNode for future reference.Figure 18: Changing IP Address via FST Web GUIThe LAARS Gateway LER and RER Startup GuidePage 23 of 4320 Industrial Way, Rochester, NH, USA 03867 • (800) 900-9276 • www.Laars.com 1604 Document 4236E
