Lab.gruppen NCG-PLM Network Configuration Manual
Also see for PLM Series PLM 10000Q: Supplementary guideUser manual addendumSpecificationsQuick start
                 | |
Contents
| 
14 PLM Series Network Configuration Guide6 NeTwORk HaRDwaRe ReCOMMeNDaTIONSonly guarantees the performance of the EtherConfor 1000 mating cycles.In order to provide a more reliable long-term solu-tion, Lab.gruppen recommends the circular metalpush-pull connector from LEMO ® . These connectorsare rated to withstand 5000 mating cycles, and areavailable in both crimped and soldered versions.LEMO connectorsRated at 5000 insertions•Operational from -50 C to + 200 C•Nickel / brass construction•Manufacturer website: www.lemo.com•Recommended part numbers:•Female panel connector• PEG.2K.308.CYMC75Male cable connector• FGG.2K.308.CYCC75ZFemale panel connector• PHG.2K.308.CYMC75ZIn order to use the LEMO connector onemust use the following pin out. Pins 4 and6 are “shifted”. If the connector is madewith a pin-to-pin wiring configuration, theconnection will work for 100BASE-TX, but not for1000BASE-T.RJ-45 LEMO1 1 orange/white2 2 orange3 3 green/white4 6 blue5 5 blue/white6 4 green7 7 brown/white8 8 brownLinkSys waP200802.3af compatible•256 bit secure encryption•RangeBooster™ technology increases range and decreases•dead spots using standard antennaeGood results even with obstructive objects in broadcast•pathAccepts standards-based PoE (IEEE 802.3af) or external•DC powerManufacturer website:•www.linksys.com or www.3com.com6.1.3 Recommended network cabling:Belden 1305aAlthough Belden 1305A is a stranded-typecable providing high resilience against failurefrom repetitive bending or stressing, it ex-hibits a loss of 26.4 dB instead of the 24dB that is stated in the Cat-5e requirements. Thislimits the recommended length to 90.9 m. Pleasebe aware that Lab.gruppen has not verified perfor-mance at the maximum length.Belden 1305a Cat-6 cable4 pair / 8 conductor•Wire pairs are glued together to resist bend failure•Approved for both indoor and outdoor applications•Operating temperature of -20 C to +60 C•Manufacturer website: www.belden.com•6.1.4 Recommended network connectors:LEMO-type multipin connectorThe Neutrik EtherConRJ45 connector has come intowide use in the touring business. However, Neutrik |
Related manuals for Lab.gruppen PLM Series PLM 10000Q
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine