Lab.gruppen PLM Series Operation Manual

Also see for PLM 10000Q: Supplementary guide User manual addendum Specifications Quick start Technical data

Contents

Lab.gruppen PLM Series Operation Manual Manual pdf 48 page image

42Front Panel InterfacePLM Series Operation M anual R ev 1.3.57.10 Meter Mode7.10.1 Home ViewThe default view when powering on the device is Meter Mode > Home View as shown in Figure 7-4.Figure 7-4: Meter Mode > Home ViewHome View provides a summary of Module I/O gain level and limiter gain reduction, along with frame,module and channel labeling information. The example in Figure 7-4 shows a stereo 2-Way, with Module A(Input 1) feeding power output channels 1&2, and Module B (Input 2) feeding power output channels 3&4.Current View title & Frame label, Frame faults and warnings.Module A label, input gain meter, faults, warnings, clips & mutes.Module B label, input gain meter, faults, warnings, clips & mutes.This section displays confirmation of the following settings:- AES3 Input Terminated (no icon = Unterminated)- Analog Inputs Iso-Float Grounded (no icon = Floating)- Dante Clock Master (no icon = Dante Slave or Dante Disabled)- Dante Slave Only (no icon = device may be used as Dante Clock Master)REDUNDANT - Dual Redundancy networking enabledPower output 1 label, gain & limiter meters, faults, warnings, clips & mutes.Power output 2 label, gain & limiter meters, faults, warnings, clips & mutes.Power output 3 label, gain & limiter meters, faults, warnings, clips & mutes.Power output 4 label, gain & limiter meters, faults, warnings, clips & mutes.