10 Safety Do not use the body safety prop to prop a loaded body.Only qualified personnel should service the hydraulic, electrical, and pneumatic systems of this vehicle.They should also be knowledgeable about the operation of the vehicle.General Precautions Read and make sure that you fully understand this manual and all safety decals before performingmaintenance on the vehicle. Maintenance personnel must also read and understand the vehicleOperator’s Manual. In case of doubt, ask a supervisor for clarifications. Before every work day, inspect the body, the packing system, and any system that mightcompromise public and/or operator safety. Verify that the accelerator pedal, the steering wheel, mirrors, brakes, and turn signals are in goodworking order. When driving the vehicle, keep both hands on the steering wheel at all times. Stop the vehicle completely and put on the parking brake before leaving the driving position. When the vehicle is parked, the parking brake must be applied. Vehicle operators must have a clear view of lifting arm operations at all times. To prevent injury tonearby people, and damage to property and/or to the lifting arm itself, operators must be able tostop arm movement at any time. Before activating the lifting arm, operators shall make sure that people and obstructions are faraway from the vehicle. A UTOMIZER ™ vehicles are primarily designed to be operated by only one operator. However, ifLabrie Enviroquip Group customers choose to operate the vehicle with more than one operator,additional safety items shall be installed to protect the second operator from hazardous situations.IMPORTANT : In such cases, Labrie Enviroquip Group must be informed of every and all units that will be operatedby more than one operator. Labrie Enviroquip Group will then determine and supply, at thecustomer’s expense, the required safety items. For additional information, please contact LabriePlusat 1-800-231-2771. Do not operate this vehicle if there are any signs of damage or incomplete repairs.Warning! Prior to its first use, your AUTOMIZER™ must be completely lubricated, as shown on the LubeChart sticker located on the body curbside, near the hopper.Initial lubrication carried out by Labrie Enviroquip Group is sufficient for production andtransport purposes only.Danger! Operators and maintenance personnel must adhere to the following precautions at alltimes. Failure to do so may result in vehicle and/or property damage, personal injury, oreven death.
