56 General MaintenanceUpper Wear PadsWhen the packer moves vertically by more than 3 ⁄ 16” (checked with a pry bar), the upper wear padsmust be replaced.Figure 3-47 Adjustment screws and upper wear padPreparing for Upper Wear Pad ReplacementMake sure you go through the following steps:1. Start the engine and engage the hydraulic pump.2. Using the joystick, extend the automated arm to get better access to the hopper area.3. Turn OFF the hydraulic pump and the engine.4. Lock out and tag out the vehicle (see Locking Out and Tagging Out the Vehicle on page 12).5. Remove both side rail shields (see Figure 3-48).6 bolts are to be removed to take off the right-hand side rail shield.5 bolts are to be removed to take off the left-hand side rail shield.Danger! Secure the area around the path of the automated arm when performing maintenanceor repair.Wear padAdjustmentscrews
