Labrie expert 2000 Operator's Manual

Also see for expert 2000: Maintenance manual Maintenance manual

Labrie expert 2000 Operator's Manual Manual pdf 32 page image

24 C HAPTER 2ControlsMulti-cycle ControlSwitchThe MULTI-CYCLE control switch allows tochoose whether to activate the packerfor a predefined number of cycles orfor its default value, which is one cycle.• Turning the switch on allowspacker multi-cycling when thegreen packer start cycle button ispressed. See “Green Start CycleButton” on page 23.• Turning it off during multi-cyclingoperation will let the packer finishthe cycle it is on but preventing it tostart a new one. When the switch isturned off, the packer will performonly one cycle when the greenbutton is pressed.Figure 9. Multi-cycle control switchEngine RPM ControlThe Expert(t) 2000TMis equipped withan engine RPM control system whichconsists of the increment or decrementof a predetermined value of the engineRPM (revolutions per minute),depending on the results the operatorwants to achieve.To achieve faster operation of movingparts such as the tailgate, crusherpanel and packer, increase the engineRPM.To reduce the level of noise caused bythe operation of the Expert(t) 2000TM,decrease the engine RPM.Note:Increasing or decreasing theengine RPM directly affectsfuel consumption. Therefore,it is an issue to look at whenusing such system.The engine RPM controls that exist inthe Expert(t) 2000TMare the SPEED-UPswitch, the SPEED-UP INHIBITOR control,and the packer automatic speed-up.These controls are individuallypresented throughout this guide.Note:The throttle pedal is anelement that can directly affectthe engine RPM; however, itmust not be used to controlany moving parts of the bodybut rather be used for regularMulti-cycle control switch