Labrie expert 2000 Operator's Manual

Also see for expert 2000: Maintenance manual Maintenance manual

Labrie expert 2000 Operator's Manual Manual pdf 40 page image

32 C HAPTER 3Operating the Expert(t) 2000TMReport any defective systems tomaintenance personnel.Inspecting the BodyAfter the vehicle visual inspection,there comes the inspection of theExpert(t) 2000 TM’s body.To inspect the Expert(t) 2000TM’sbody:1. On the controls station, press thegreen button to activate thepacker one full cycle.2. Check the side hopper door forproper latching at the front andrear.3. Make sure the tailgate safetypins are in place.4. Check the frame area, fuel tank,hydraulic tank, air tanks (airtanks must be drained everyday), wheels, and cleaning trapfor leaks, cracks or other typesof problems.5. Go around the back, checklights, camera, safety labels, etc.Report any defective systems tomaintenance personnel.Note:Some of the items mentionedherein may not be part of yourExpert(t) 2000 TM. They areoptional and may or may notbe included in the originalPurchase Order.Adjusting MirrorsEvery time you use the Expert(t)2000 TM, you must check the adjustmentof the mirrors to make sure you haveall-around visibility from either drivingposition.The following diagrams show the idealmirror adjustments for both drivingpositions.DANGERN EVER ATTEMPT TO REACHINSIDE THE HOPPER AREA WHENTHE PACKER IS IN MOTION .S EVERE INJURY AND /OR DEATHWILL OCCUR.