Black plate (51,1)Buick LaCrosse Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-7707475) - 2015 - CRC - 10/9/14Instruments and Controls 5-51Universal RemoteSystemSee Radio Frequency Statement onpage 13-12.Universal Remote SystemProgrammingIf equipped, these buttons are in theoverhead console.This system can replace up to threeremote control transmitters used toactivate devices such as garagedoor openers, security systems, andhome automation devices. Theseinstructions refer to a garage dooropener, but can be used for otherdevices.Do not use the Universal Remotesystem with any garage door openerthat does not have the stop andreverse feature. This includes anygarage door opener modelmanufactured before April 1, 1982.Read these instructions completelybefore programming the UniversalRemote system. It may help to haveanother person assist with theprogramming process.Keep the original hand-heldtransmitter for use in other vehiclesas well as for future programming.Erase the programming whenvehicle ownership is terminated.See “Erasing Universal RemoteSystem Buttons” later in thissection.To program a garage door opener,park outside directly in line with andfacing the garage door openerreceiver. Clear all people andobjects near the garage door.Make sure the hand-held transmitterhas a new battery for quick andaccurate transmission of theradio-frequency signal.Programming the UniversalRemote SystemFor questions or help programmingthe Universal Remote system, call1-800-355-3515 or seewww.homelink.com.Programming involvestime-sensitive actions, and may timeout causing the procedure to berepeated.To program up to three devices:1. Hold the end of the hand-heldtransmitter about 3 to 8 cm (1 to3 in) away from the UniversalRemote system buttons with theindicator light in view. The
