18When completing laminate processing, the laminate roller can be broken or damaged by turningpower off immediately. Use 【COLD】 function to decrease temperature of the laminate roller andfinish the work before turning power off.When completing laminate processingThe machine can be immediately turned off by lifting the lever without using COLD function, butfrequent use of this can shorten lifetime of rollers.COLD functionWhen 【COLD】 button on the operation panel is pushed, setting temperature is set to 0℃.If the roller continues to rotate but surface temperature falls below 120℃, cooling fan will automaticallystop. Then lift the lever to turn power off.Power OFFLift the lever.Push 【COLD】button in HOTsettingTemperature: 0℃Speed: 1.FAN will stop whensurface temperaturefalls below 120℃.