Page _ 10Before cleaning or attempting any type of maintenance, always make sure that the electricitysupply is disconnected.The manufacturer declines all liability in cases where the instructions for the appropriate installation,maintenance and use of the extractor hood are not observed.If the power cable is cut or damaged in any way, disconnect the extractor from the electricity supply and callthe service number on the rear cover of this booklet or a suitably repairer.General CleaningWipe the external surfaces of the appliance regularly using warm water and a mild detergent. NEVER useabrasive cleaners.Care and MaintenanceThe Grease FiltersYour extractor includes a grease which helpsto protect your kitchen & furniture from greasyresidues by out grease particles.• Over time, the grease may become arisk if the greasy residue is allowed to build up.• To prevent a hazard, the greaseshould be cleaned.• Depending on use, this should be done every10-15 days or for light usage once a month.••First remove the grease filters by pushing thein the button on the handle and pulling thefilter away from the cooker hood.Soak the grease filters in hot water andwashing up liquid for at least 3 minutes.The use a soft brush to loosen any greasedeposits that have formed. Rinse the filtersthoroughly with hot water. Repeat the processif necessary.• If grease filters are washed in a dishwasher(60˚c) the plastic may discolour• Allow the grease to dry completely before• The extractor must never be operated withoutthe grease in position.