354 Commissioning/Decommissioning4.4.12 Customer Password InputThe password for the customer level can be set individually.To enter a new password, at least customer access level must be set.Enter the new password in parameter 1472 (see Fig. 4-12 Password input).NOTICEThe system accepts the password a few seconds after the input.The display shows the new password as ’####’. Reading this password is not possible.Fig. 4-12 Password inputNOTICEThe factory setting of the password is ’0000’.This corresponds to the default settings of password input.The customer access level can be activated by switching briefly to password input and leavingit again without making any changes.NOTICEThe customer gets the password for service access level by a letter. Only trained personnelmay get this password. OEM customers have their own company-specific password. This isthe same in all LAMTEC devices.
