Lancom 1811 User Manual

Contents

Lancom 1811 User Manual Manual pdf 56 page image

LANCOM 1811 Wireless DSL – LANCOM 1821+ Wireless ADSL Chapter 6: Providing dial- in access56ENsame applies in the other direction as well: computers in the LAN will also beable to access the remote machine.6.1.3 Settings for IPXTwo IPX network numbers must be provided for remote access to an IPX net-work: the IPX network number of the head office an additional IPX network number for the higher-level WANThe required network numbers are designated as “External Network Num-bers”. Like IP network addresses, they apply to an entire LAN segment. On theother hand, internal IPX numbers are used to address specific Novell serversin the LAN. All three specified network numbers must be distinct from oneanother and from all used internal IPX network numbers.In addition, it may be necessary to enter the frame type (“binding”).Specifying the IPX network number and binding used is not necessary if theremote network also contains a Novell server. A network number for the WANmust also be entered manually in this case, however.6.1.4 Settings for NetBIOS routingAll that is required to use NetBIOS is the name of a Windows workgroup fromthe router's own LAN. The connection is not established automatically. The RAS user mustmanually establish a connection to the LANCOM Router via Dial-UpLAN of the head officeIPX network no.: 00000001, Binding: Ethernet_II(0123) 123456WANIPX network no.:00000009IPX internal net:00020002RemoteworkstationISDN adapterUser: 'SAMPLE'(0123) 777888VPN or ISDNconnection