Land Pride BB4596 Operator's Manual

Contents

Land Pride BB4596 Operator's Manual Manual pdf 17 page image

Section 1: Assembly & Set-upBB4596, BB4510, & BB4512 Pull Type Drag Scraper 306-096M11/28/18 13Table of ContentsWeight Box Assembly (Optional)Refer to Figure 1-10:1. Attach weight box (#1) to the standard axle or tilt axleby inserting 1/2"-13 x 1 1/4" GR5 hex head capscrews (#2) in from the top of the weight box.2. Secure cap screws with flat washers (#5), lockwashers (#4), and hex nuts (#3). Tighten hex nuts tothe correct torque.IMPORTANT: The weight box can be filled level fullof concrete. Make sure in assembly that the headsof cap screws (#2) are inside the box and that thenuts are outside the box for easy removal when fullof concrete.Standard Axle AssemblyFigure 1-1027989