Land Pride HD25 Operator's Manual
Also see for Post Hole Diggers HD25: Specifications & CapacitiesOperator's manual
                                              | |
12Section 1: Assembly & Set-upHD25 and HD35 Hydraulic Post Hole Diggers 317-076M 7/31/17Table of ContentsSkid/Loader Hose AssemblyDetermine which mount type the skid/loader hitch mountis set-up with and follow instructions below.Center/Offset Mount for TractorsRefer to Figure 1-5:1. Attach 45 o elbows (#9) to ports in hydraulicmotor (#4). Rotate elbows to point towards the rightas shown and tighten.2. Screw MJIC end of adapters (#5) to one end ofhydraulic hoses (#6 & #7) until tight.3. Screw quick release couplers (#8) (couplersfurnished by customer) to adapter fittings (#5) untiltight.4. Thread other end of hydraulic hoses (#6 & #7)through opening (#1) and hose protection ring (#2).5. Screw hoses (#6 & #7) to elbows (#9) until tight.6. Skip to “Hooking Up Skid/Loader Mount” onpage 15.Center/Offset Mount for Skid SteersRefer to Figure 1-7:1. Attach 45 o elbows (#8A & #8B) to ports “A” & “B” inhydraulic motor (#4). Rotate elbows to point towardsthe left as shown and tighten.2. Screw MJIC end of 90 o elbows (#4) or MJIC end ofadapters (#5) to one end of hydraulichoses (#9 & #10) until tight.3. Thread other end of hydraulic hoses (#9 & #10)through opening (#1). Screw hydraulic hoses toelbows (#8A & #8B) until tight.4. Select the coupler (male #6 or female #7) that mateswith high pressure coupler at the skid steer. Attachselected coupler to hydraulic hose (#9) and tighten.Hose #9 attaches to port “A” on the motor.5. Screw remaining coupler to hydraulic hose (#10) untiltight.6. Skip to “Hooking Up Skid/Loader Mount” onpage 15.NOTE: Use Hose Stay Kit #S6689 (availablethrough Kubota) and 90 o elbows (#4) if attaching toKubota CTL.NOTE: Customer to select which fitting best fitsequipment set-up, 90 o elbows (#4) or straightadapters (#5).Center/Offset Hydraulic Hose Set-Up With Tractor LoaderFigure 1-5Center Hydraulic Hose Set-Up With Skid Steer LoaderFigure 1-7Hooking Up 3-Point Mount! WARNING!To prevent serious injury or death:• A Crushing Hazard exists while hooking-up and unhookingimplement. Keep people and animals away while backing-up to implement or pulling away from implement. Do notoperate hydraulic 3-point lift controls while a person oranimal is directly behind the tractor or near the implement.• Always set tractor transmission in park or engage parkbrake, shut tractor off and remove switch key beforeallowing anyone including the operator to hook-up andunhook implement.3597935980 |
Related manuals for Land Pride Post Hole Diggers HD25
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine