Land Pride QH05 Series Operator's Manual

Also see for QH05 Series: Operator's manual Operator's manual

Contents

Land Pride QH05 Series Operator's Manual Manual pdf 13 page image

Section 1: Assembly & Set-UpTable of ContentsQH05, QH10, QH15, QH20, & QH30 Quick Hitches 320-003M10/26/18 9Implement Hook-Up to QH10Go to page 8 for “Implement Hook-Up to QH05”go to page 10 for “Implement Hook-Up to QH15”go to page 12 for “Implement Hook-Up to QH20”and page 13 for Implement Hook-Up to QH30.DANGER!To avoid serious injury or death:A crushing hazard exists while hooking-up and unhookingimplement. Keep people and animals away while backing-upto implement or pulling away from implement. Do not operatehydraulic controls while a person or animal is directly behindthe power machine or near the implement.CAUTION!To avoid minor or moderate injury:Release Handles have areas where pinching can occur. Keephands, fingers, and other body parts away from the pivotingareas of the release handles. Always use handle grips.Hook-up Without Floating Top LinksRefer to Figure 1-4:1. Make certain implement’s lower hitch pins aresecured in their respective clevises.2. Move Quick Hitch release levers from lock position tofull forward position as shown. If unit is too light, youmay need to start with release levers in locking notchand release levers when hooked up.NOTE: Quick Hitch hook-up to tractor is requiredbefore proceeding with implement hook-up.3. Place Quick Hitch release handles in the downposition as shown.4. Carefully back tractor to align auto-lock hooks underthe implement’s lower hitch pins and upper hookbelow upper hitch point.5. Slowly raise 3-point lift arms until auto-lock hookslock onto the implement’s lower hitch pins and upperhook captures implement’s upper hitch point.6. If required, follow implement guidelines for drivelinehook-up and required driveline length.Hook-up With Floating Top Links1. Complete steps 1-6 above except shorten top centerlink to keep upper hook from capturing implement’supper hitch point.2. Attach floating top links to Quick Hitch andimplement. Refer to “Floating Top Link” on page 17for detailed instructions.IMPORTANT: Make certain lower hitch pins are fullyseated in the auto-lock hooks and captured with lockarms above. Also, make sure upper hitch point iscaptured in the Quick Hitch upper hook.IMPORTANT: When hooking-up a driveline, makesure it is not too short to comply with shaftoverlapping guidelines. Refer to your implementOperator’s Manual for driveline hook-up instructions.Replace driveline shafts and shields if thy are tooshort. See your nearest Land Pride dealer for newshafts and shields.Implement Hook-Up with QH10Figure 1-470123